mip::commands_3dm::GpioConfig Struct Reference

#include <commands_3dm.hpp>

Classes
struct	PinMode
struct	Response

Public Types
enum	Feature : uint8_t {   Feature::UNUSED = 0, Feature::GPIO = 1, Feature::PPS = 2, Feature::ENCODER = 3,   Feature::TIMESTAMP = 4, Feature::UART = 5 }
enum	Behavior : uint8_t {   Behavior::UNUSED = 0, Behavior::GPIO_INPUT = 1, Behavior::GPIO_OUTPUT_LOW = 2, Behavior::GPIO_OUTPUT_HIGH = 3,   Behavior::PPS_INPUT = 1, Behavior::PPS_OUTPUT = 2, Behavior::ENCODER_A = 1, Behavior::ENCODER_B = 2,   Behavior::TIMESTAMP_RISING = 1, Behavior::TIMESTAMP_FALLING = 2, Behavior::TIMESTAMP_EITHER = 3, Behavior::UART_PORT2_TX = 33,   Behavior::UART_PORT2_RX = 34, Behavior::UART_PORT3_TX = 49, Behavior::UART_PORT3_RX = 50 }

Public Member Functions
auto	asTuple () const
auto	asTuple ()
void	insert (Serializer &serializer) const
	Serialization. More...
void	extract (Serializer &serializer)

Static Public Member Functions
static GpioConfig	create_sld_all (::mip::FunctionSelector function)

Public Attributes
FunctionSelector	function = static_cast<FunctionSelector>(0)
	Parameters. More...
uint8_t	pin = 0
	GPIO pin number counting from 1. For save, load, and default function selectors, this can be 0 to select all pins. More...
Feature	feature = static_cast<Feature>(0)
	Determines how the pin will be used. More...
Behavior	behavior = static_cast<Behavior>(0)
	Select an appropriate value from the enumeration based on the selected feature (e.g. for PPS, select one of the values prefixed with PPS_.) More...
PinMode	pin_mode
	GPIO configuration. May be restricted depending on device, pin, feature, and behavior. See device user manual. More...

Static Public Attributes
static constexpr const uint8_t	DESCRIPTOR_SET = ::mip::commands_3dm::DESCRIPTOR_SET
	Descriptors. More...
static constexpr const uint8_t	FIELD_DESCRIPTOR = ::mip::commands_3dm::CMD_GPIO_CONFIG
static constexpr const CompositeDescriptor	DESCRIPTOR = {DESCRIPTOR_SET, FIELD_DESCRIPTOR}
static constexpr const char *	NAME = "GpioConfig"
static constexpr const char *	DOC_NAME = "GPIO Configuration"
static constexpr const bool	HAS_FUNCTION_SELECTOR = true

Member Enumeration Documentation

Feature

enum mip::commands_3dm::GpioConfig::Feature : uint8_t

strong

Enumerator
UNUSED	The pin is not used. It may be technically possible to read the pin state in this mode, but this is not guaranteed to be true of all devices or pins.
GPIO	General purpose input or output. Use this for direct control of pin output state or to stream the state of the pin.
PPS	Pulse per second input or output.
ENCODER	Motor encoder/odometer input.
TIMESTAMP	Precision Timestamping. Use with Event Trigger Configuration (0x0C,0x2E).
UART	UART data or control lines.

Behavior

enum mip::commands_3dm::GpioConfig::Behavior : uint8_t

strong

Enumerator
UNUSED	Use 0 unless otherwise specified.
GPIO_INPUT	Pin will be an input. This can be used to stream or poll the value and is the default setting.
GPIO_OUTPUT_LOW	Pin is an output initially in the LOW state. This state will be restored during system startup if the configuration is saved.
GPIO_OUTPUT_HIGH	Pin is an output initially in the HIGH state. This state will be restored during system startup if the configuration is saved.
PPS_INPUT	Pin will receive the pulse-per-second signal. Only one pin can have this behavior. This will only work if the PPS Source command is configured to GPIO.
PPS_OUTPUT	Pin will transmit the pulse-per-second signal from the device.
ENCODER_A	Encoder "A" quadrature input. Only one pin can have this behavior. The last command to set this behavior will take precedence.
ENCODER_B	Encoder "B" quadrature input. Only one pin can have this behavior. The last command to set this behavior will take precedence.
TIMESTAMP_RISING	Rising edges will be timestamped.
TIMESTAMP_FALLING	Falling edges will be timestamped.
TIMESTAMP_EITHER	Both rising and falling edges will be timestamped.
UART_PORT2_TX	(0x21) UART port 2 transmit.
UART_PORT2_RX	(0x22) UART port 2 receive.
UART_PORT3_TX	(0x31) UART port 3 transmit.
UART_PORT3_RX	(0x32) UART port 3 receive.

Member Function Documentation

asTuple() [1/2]

auto mip::commands_3dm::GpioConfig::asTuple ( ) const

inline

asTuple() [2/2]

auto mip::commands_3dm::GpioConfig::asTuple ( )

inline

create_sld_all()

static GpioConfig mip::commands_3dm::GpioConfig::create_sld_all ( ::mip::FunctionSelector  function )

inlinestatic

insert()

void mip::commands_3dm::GpioConfig::insert

(

Serializer &

serializer

)

const

extract()

void mip::commands_3dm::GpioConfig::extract

(

Serializer &

serializer

)

Member Data Documentation

function

FunctionSelector mip::commands_3dm::GpioConfig::function = static_cast<FunctionSelector>(0)

pin

uint8_t mip::commands_3dm::GpioConfig::pin = 0

feature

Feature mip::commands_3dm::GpioConfig::feature = static_cast<Feature>(0)

behavior

Behavior mip::commands_3dm::GpioConfig::behavior = static_cast<Behavior>(0)

pin_mode

PinMode mip::commands_3dm::GpioConfig::pin_mode

DESCRIPTOR_SET

constexpr const uint8_t mip::commands_3dm::GpioConfig::DESCRIPTOR_SET = ::mip::commands_3dm::DESCRIPTOR_SET

staticconstexpr

FIELD_DESCRIPTOR

constexpr const uint8_t mip::commands_3dm::GpioConfig::FIELD_DESCRIPTOR = ::mip::commands_3dm::CMD_GPIO_CONFIG

staticconstexpr

DESCRIPTOR

constexpr const CompositeDescriptor mip::commands_3dm::GpioConfig::DESCRIPTOR = {DESCRIPTOR_SET, FIELD_DESCRIPTOR}

staticconstexpr

NAME

constexpr const char* mip::commands_3dm::GpioConfig::NAME = "GpioConfig"

staticconstexpr

DOC_NAME

constexpr const char* mip::commands_3dm::GpioConfig::DOC_NAME = "GPIO Configuration"

staticconstexpr

HAS_FUNCTION_SELECTOR

constexpr const bool mip::commands_3dm::GpioConfig::HAS_FUNCTION_SELECTOR = true

staticconstexpr

---

The documentation for this struct was generated from the following files:

• src/cpp/mip/definitions/commands_3dm.hpp
• src/cpp/mip/definitions/commands_3dm.cpp