Reassign data protocols, both incoming and outgoing. More...

Classes
struct	mip::commands_system::InterfaceControl

Functions
TypedResult< InterfaceControl >	mip::commands_system::writeInterfaceControl (C::mip_interface &device, CommsInterface port, CommsProtocol protocolsIncoming, CommsProtocol protocolsOutgoing)

TypedResult< InterfaceControl >	mip::commands_system::readInterfaceControl (C::mip_interface &device, CommsInterface port, CommsProtocol protocolsIncomingOut, CommsProtocol protocolsOutgoingOut)

TypedResult< InterfaceControl >	mip::commands_system::saveInterfaceControl (C::mip_interface &device, CommsInterface port)

TypedResult< InterfaceControl >	mip::commands_system::loadInterfaceControl (C::mip_interface &device, CommsInterface port)

TypedResult< InterfaceControl >	mip::commands_system::defaultInterfaceControl (C::mip_interface &device, CommsInterface port)

Detailed Description

Responds over the port that sent the command with an ACK/NACK immediately after the operation is complete. It is the user's responsibility to not send any critical information or commands while awaiting a response! Doing so while this command processes may cause those packets to be dropped.

Constraints:

Limited parsers and data streams are available. Refer to your device manual for more information.
The Main port always has a MIP parser and MIP data stream bound. Additionally, Main is the only port that can process interface control commands.

If response is NACK, no change was made. Here's what can cause a NACK:

The requested protocol isn't supported on this device, or on this port, or this device doesn't support that many parsers.
The request would break the general constraints listed above, or a device-specific constraint.

Function Documentation

◆ writeInterfaceControl()

TypedResult< InterfaceControl > mip::commands_system::writeInterfaceControl	(	C::mip_interface &	device,
		CommsInterface	port,
		CommsProtocol	protocolsIncoming,
		CommsProtocol	protocolsOutgoing
	)

◆ readInterfaceControl()

TypedResult< InterfaceControl > mip::commands_system::readInterfaceControl	(	C::mip_interface &	device,
		CommsInterface	port,
		CommsProtocol *	protocolsIncomingOut,
		CommsProtocol *	protocolsOutgoingOut
	)

◆ saveInterfaceControl()

TypedResult< InterfaceControl > mip::commands_system::saveInterfaceControl	(	C::mip_interface &	device,
		CommsInterface	port
	)

◆ loadInterfaceControl()

TypedResult< InterfaceControl > mip::commands_system::loadInterfaceControl	(	C::mip_interface &	device,
		CommsInterface	port
	)

◆ defaultInterfaceControl()

TypedResult< InterfaceControl > mip::commands_system::defaultInterfaceControl	(	C::mip_interface &	device,
		CommsInterface	port
	)

Classes